Amberlyst 15 msds pdf
Page 3 of 4 Flammability (solid, gas) Not applicable Viscosity: 68mm2 /s @ 40 C VOC: 0% Pour Point: Not established 10 – Stability and Reactivity Reactivity: Not reactive under normal conditions Chemical Stability: Stable Possibility of Hazardous Reactions: May react with strong oxidizers generating heat. Material Safety Data Sheet Product name: AMBYLGON TA 15/2 (#020109) Date: March 11, 2003 Replaces: March 2000 Page: 1 of 3 _____ The information herein is given in good faith, but without warranty, express or implied. the product container, label or Material Safety Data Sheet with you when Syngenta, a poisoncontrol center or calling doctor, or going for treatment. This MSDS is provided solely for the purpose of conveying health, safety, and environmental information. This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
› Regulatory information 16.
› Address/Telephone number.
› Pulmonary aspiration hazard.
› Cover wounds with sterile bandage.
› R 241-50, decree of 07.11.1977 16.
› Catalyst Performance.
› Remove clothing while washing.
› Purpose and Applicability .
Inhalation: If inhaled, supply fresh air or oxygen.
Box 1, Kiryat Ekron, Israel 70500, Tel- (972-8) 9 444 560, Fax- (972-8) 9 413 066 SPECIAL FIRE FIGHTING PROCEDURES: Personal: Fire may be fought, but only from safe fire-fighting distance. The KSF clay pre-sented high sensibility to the presence of co-solvents, leading to low conversions compared to the co-solvent-free system. 5 of 5 Toll Free: (888) 428-0558 International: (858) 457-1919 www.genlantis.com hazard provided in the Hazard Communication Standard (29 CFR 1910.1200) SECTION 15. Further information about storage conditions:Store in cool, dry conditions in well sealed receptacles. Material Safety Data Sheet Product name : QUARTZ 7000 SN 15W-50 MSDS number : 187661 Version : 0 Date : 6/18/2012 Date of the previous version : - Social Security code : Art.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. FIRST AID MEASURES SKIN contact ; Remove product from skin with dry cloth or towel, and wash exposed area with detergent. MATERIAL SAFETY DATA SHEET Page 4 of 6 8/29/2002 FROTH PAK 115 SKIN CONTACT: Prolonged or repeated exposure may cause skin irritation.
Section 16 – Other Information Remark: Contents of this manual have been edited based on data, information, etc. alyzed by Amberlyst 15 has also been described in past investigations both with a quasi-homogeneous and a quasi-heterogeneous model. The Canadian Journal of Chemical Engineering, published by Wiley on behalf of The Canadian Society for Chemical Engineering, is the forum for publication of high quality original research articles, new theoretical interpretation or experimental findings and critical reviews in the science or industrial practice of chemical and biochemical processes. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Skin Contact: Immediately flush skin with plenty of soap and water for at least 15 minutes. Effect of process parameters such as temperature, flow rate of acetic acid solution, and resin's silver content were investigated. 4 - FIRST AID MEASURES 4.1 Description of first aid measures If inhaled - If breathed in, move person into fresh air.
In the paper: "Amberlyst-15 catalyzed acetylation of phenols and alcohols under solvent free conditions", released recently in Recyclable Catalysis, an open access journal by Versita, Prof. Microwave irradiation using Amberlyst A-15 as a reusable catalyst and get a better yield. MSDS No.G0005E Stannous Sulfate Rev-4 April 15, 2013 Page: 3/5 Skin Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Chemwatch Independent Material Safety Data Sheet Issue Date: 16-Dec-2011 CHEMWATCH 5042-15 9317SP(vs) Version No:5 CD 2011/4 Page 2 of 5 Section 4 - FIRST AID MEASURES EYE If this product comes in contact with eyes: - Wash out immediately with water. Xu and Chuang  deduced a ki-netic equation in the form of a power law model from the Langmuir–Hinshelwood model for the methyl acetate system, by assuming that the adsorption is weak for all the components. Special procedure: Shut off leak, if safe to do so, .Keep non-involved people away from spill site. This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
Federal Regulations: CERCLA 103 Reportable Quantity: This product is not subject to CERCLA reporting requirements, however, oil spills are reportable to the National Response Center under the Clean Water Act and many states have more stringent release reporting requirements. Page 3 of 8 MSDS t Ethyl Acetate Ingestion: Give large amounts of water to drink. Min.Order: 1 Kilogram FOB Price: USD $ 100.0-100.0/Kilogram HangYu Chemical is a leading manufacturer and supplier of chemicals in China. REGULATORY INFORMATION US Federal Regulations: Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has been prepared in compliance with the federal OSHA Hazard Communication Standard 29 CFR 1910.1200. We develop produce and distribute high quality pharmaceuticals, intermediates, special chemicals and OLED intermediates and other fine chemicals.
MSDS No: 2187 Page 3 of 8 Fire Fighting Instructions: Evacuate all persons from the fire area to an explosion-protected location. Talukder and coauthors reported that palm fatty acid distillate (PFAD), a byproduct from the palm oil refinery process, has been utilized as an alternative feedstock for biodiesel production via Amberlyst-15 catalyzed esterification.3b The BD yield obtained using Amberlyst-15 is 97%. Soak up residue with an absorbent such as clay, sand or other suitable material and dispose of properly.
First-aid measures after skin contact : Wash immediately with lots of water (15 minutes)/shower. Ammonia ammonia California PEL for Chemical Contaminants (Table AC-1) (United States).
MATERIAL SAFETY DATA SHEET Quali-Pro® Abamectin 0.15 EC Page 2 of 5 2-3-10 •IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Material Safety data sheet High Speed Diesel Fire extinguishing media: Foam, Carbon dioxide, Dry Chemical Powder.Water may be used to cool fire-exposed containers. Sources of information for this data sheet: • Multisol Limited "ULTRAGRADE 15" Material Safety Data Sheet. 1936-15-8 Orange G Dye unlisted 3 - HAZARDS IDENTIFICATION Not a hazardous substance or mixture according to Regulation (EC) No. Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
MATERIAL SAFETY DATA SHEET FIRESTONE DOT PRIMARY/SECONDARY LABEL: Toxic 6.1 DOT PRIMARY/SECONDARY PLACARD: Toxic 6.1 15. This product and/or its components are listed on the Toxic Substances Control Act (TSCA) inventory. MSDS: Fix15-MSP15 MSDS Established: March 2012 MSDS Revised: an.01/06/2016 MATERIAL SAFETY DATA SHEET Fix15 -MSP15 The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its publication. The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. ECOLOGICAL INFORMATION No data are available on the adverse effect s of this material on the environment. AMBERLYST 35DRY is a bead form, strongly acidic ion exchange resin developed particularly for heterogeneous acid catalysis of a wide variety of organic reactions. Superiority amberlyst-15 typical properties nanda synthetic these properties are typical but do not constitute specifications.
HP 6040-1314 Date of Preparation: 4/4/01 Revision Date: 4/4/01 Section 1 - Chemical Product and Company Identification Product/Chemical Name: HP 6040-1314 Grease General Use: Lubricating Grease Manufacturer: Nye Lubricants, Inc. Interestingly, the first three catalysts did not form the rearranged acetate at room temperature and even at 40ºC. Material Safety Data Sheet Version 1.12 MSDS Number 300000000002 Revision Date 05/11/2012 Print Date 06/17/2012 4/8 Air Products and Chemicals,Inc Acetylene rating and materials of construction. Material Safety Data Sheet Alpha Chemtrec #5591 US & Canada: 800 424-9300 Mexico: 01 800 022 1400, (55) 5559 1588 Emergency phone: 2 3 0 Health Flammability Physical hazards Health Flammability Instability Special 2 3 0 Supersedes Date :4/22/2010. The impact of column flow rate conditions and the molar fatty acid to ethanol feedstock ratio on ester production is reported.
EMERGENCY TELEPHONE NUMBERS Detco Industries, Inc.
RUBIA TIR 7900 15W-40 MSDS TLC .doc Page 3 6/21/2011 SECTION #6 TOXICOLOGICAL INFORMATION SPECIES LD50 ORAL LD50 DERMAL LC50 INHALATION HRS Rat > 5000 mg/Kg > 2000 mg/Kg N/A --- INHALATION: Prolonged exposure to high vapor concentration of this product can cause headache, dizziness and nausea. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Pan-Gel UT-15 GENERAL USE: Drain Pan Treatment PRODUCT CODE: UT-15 MANUFACTURER 24 HR. Print Date: 5/15/2015 MSDS Number: R0340954 Pyroil™ STARTING FLUID PYSFR11 Version: 6.0 Page 4 / 14 Inhalation If symptoms develop, move individual away from exposure and into fresh air. The material safety data sheet is furnished to every manufacturer as a reference to secure the safe handling of chemical. Material Safety Data Sheet Revision Date: 05-09-2012 Product Code: 70714-04 Page 3 of 5 material.
INHALATION: At room temperature exposures to vapors may be due to presence of 1,1, 1,2-Tetrafluoroethane and HCFC-22. IN1021 Revised: 8-12-15 MATERIAL SAFETY DATA SHEET Product Identification Product Name: Histochemical Antisera Catalog No.
Product and company identification PH DOWN LIQUID:: Conforms to ANSI Z400.1-2004 Standard - United States Date Version:: 2 06/15/2013 Supplier/Manufacturer MSDS authored by :KMK Regulatory Services Inc. Section 15 – Regulatory Information National or local laws/ regulations applied to battery. MSDS Name: Amberlyst 15(wet) ion-exchange resin Catalog Numbers: AC202150000, AC202150250, AC202155000 Synonyms: Company Identification: Acros Organics N.V. The Amberlyst-15 [H + exchange capacity (4.2 meq/g) and high surface area (42 m 2/g)] (3 equiv.), [Bmim][PF 6] (2 mL) and 1a (3 mmol) was taken in reaction vessel. Amberlyst 15 was washed with methanol and distilled water, then vacuum-dried at 348 K the over night. from 4.4 to 69.5% for petroleum ether using Amberlyst 15 and KSF as catalysts, respectively. If you resell this product, this MSDS must be given to the buyer or the information contained herein must be incorporated in your MSDS. Amberlyst 15, (dry) ion-exchange resin: Amberlyst 15, (dry) ion-exchange resin: 9037-24-5: none: European Inventory of Existing Commercial Chemical Substances (EINECS) Not Listed.
material safety data sheet section 1--product identification and use product identifier calcofluor white stain catalogue number: sc15 manufacturer's name supplier's name dalynn biologicals inc. It is known that the hydrogen form of Amberlyst® 15 (H) displays sulfonic acid functionality. Chemical Product and Company Identification Common Name/ Trade Name Catalog Number(s).